10 Structure, function and maintenance standard SEN00607-00 When load pressure (P2) is lower than output pressure (PR) of the self pressure reducing valve. q The spring (3) and the pressure (PR) [0 MPa {0kg/cm 2 } at the time of engine stop] pushes valve (2) in the direction to close the circuit between ports (P1) and (P2). When the hydraulic oil enters (P1) port, the expression [pressure (P1) C Spring (3) force + (area d x (PR) pressure)] holds, and the self pressure reducing valve will adjust the openings of ports (P1) and (P2) so that pressure (P1) can be maintained higher than pressure (PR).
q When (PR) pressure rises above set pressure, poppet (5) opens and hydraulic oil flows through the route, from (PR) port, through hole (a) in spool (8), through poppet (5) opening to the tank port (T). q Therefore, differential pressure occurs around hole (a) in spool (8) and spool (8) moves from port (P1) in the direction to close (PR) opening. Then (P1) pressure is reduced and adjusted to a certain pressure [set pressure] with the opening and is supplied as (PR) pressure. D155AX-6 65