Komatsu D155AX-6 — ENGINE CONTROL SYSTEM

10 Structure, function and maintenance standard SEN00610-00 Engine control system 1 Outline q The information of the engine throttle controller is possessed jointly by the other controllers through the network and used for the optimum control of the engine and machine body. q The engine throttle controller receives the fuel control dial signal of the 1st throttle, decelera- tor pedal signal of the 2nd throttle, and 3rd throttle signal which is the control signal from the power train controller, and then controls the fuel supply pump according to the command signal having the lowest engine speed. The control signals of the 3rd throttle are as follows.

(1) Auto deceleration (F3, R3, F2, R2) (2) Neutral deceleration q The auto deceleration is a function of setting the engine speed low temporarily when the travel direction is changed from F3, R3, F2, and R2 (to protect the transmission clutch). q The neutral deceleration is a function of limit- ing the high idle speed when the transmission is set in neutral. q The power train controller calculates a proper engine speed from information items (1), (2), etc. and sends it as the 3rd throttle signal to the engine throttle controller. D155AX-6 3