SEN00610-00 10 Structure, function and maintenance standard Processing in machine monitor (Common to all specifications) Display of machine monitor Display of monitoring condition Other items a See testing and adjusting, special functions of machine monitor. 6 D155AX-6 Contents and conditions of processing Method Flow of signals 1. Display of travel direction and gear speed. • F1, R3, etc. are notified by CAN according to infor- mation of power train controller. CAN Each sensor/solenoid-controller- machine monitor 2. Display of gauges of fuel level, engine coolant tempera- ture, etc. • Controller converts the sensor signals into gauge numbers and sends them to the machine monitor by CAN.
CAN 3. Display of trouble • When the machine has a trouble, the corresponding failure code is notified to the machine monitor by CAN. • Which one should be turned on, the buzzer or the caution lamp, is notified, too. 1) In normal state User code, service code 2) In trouble history display mode The service code (6-digit code) and the following items are displayed • Time after first occurrence • Time after latest occurrence • Number of past occurrences The machine monitor displays the code. CAN Contents and conditions of processing Method Flow of signals 1. The communication conditions of each sensor, each so- lenoid, and CAN are displayed. • The item Nos.
and device conditions are notified to the machine monitor by CAN. • The machine monitor displays the items and each value. CAN Each sensor-controller-machine monitor 2. Each items is selected by using the cursor switches and confirmation switch. CAN Contents and conditions of processing Method Flow of signals 01 Monitoring 02 Trouble history 03 Maintenance history 04 Maintenance mode change 05 Telephone number set 06 Default 07 Adjustment 08 PM clinic 09 Reduced cylinders mode operation 10 No injection cranking 11 Fuel consumption display 12 — 13 Service message display 88 Screen adjustment a 89 —