30 Testing and adjusting SEN00681-01 Display of check of preset If the check before starting is finished normally, the screen to check the preset (gear speed at start) is displayed for 2 seconds. a After display of check of preset is finished, the screen changes to "Display of ordinary screen". Display of end screen When the starting switch is turned OFF, the end screen is displayed for 5 seconds. a Another message may be displayed on the end screen, depending on the message dis- play function of KOMTRAX. Display of ordinary screen If the machine monitor starts normally, the ordinary screen is displayed.
a Service meter (a) or a clock is displayed at the center upper section of the screen (The ser- vice meter or clock is selected with [F4]). a Power train oil temperature gauge (b) is dis- played on the multi-gauge section (It is turned ON and OFF with the user mode function or [F2]). a ECO gauge (c) is displayed at the right end of the screen (It is turned ON and OFF in the ser- vice mode). Selection of operation mode While the ordinary screen is displayed, press the operation mode selector switch, and the operation mode monitor (a) changes. a Each time the switch is pressed, the operation mode changes between [P (Power)] and [E (Economy)]. D155AX-6 7