Komatsu D155AX-6 — SPECIAL FUNCTIONS OF MACHINE MONITOR (EMMS)

SEN00681-01 30 Testing and adjusting Adjustment ID: 8001 (Blade lift lever max. raising position adjustment) Adjustment ID: 8002 (Blade lift lever max. lowering position adjustment) q This adjustment code is used to make the work equipment controller recognize the maximum raising position of the lift potentiometer of the blade control lever. a After the work equipment controller or blade control lever is replaced, be sure to carry out this adjustment once. q This adjustment code is used to make the work equipment controller recognize the maximum lowering position of the lift potentiometer of the blade control lever.

a After the work equipment controller or blade control lever is replaced, be sure to carry out this adjustment once. q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Operating method 1) Operate the blade control lever to the rais- ing stroke end of the lifting direction and keep it in that position. 2) Press [F6] and check that the alarm buzzer sounds.

a Even if the adjustment is carried out, the displayed value does not change. a Even if this adjustment code is turned off, the adjustment is effective. a This adjustment code is used to make the controller recognize the maximum raising position of the potentiometer. It is not used to adjust the sensitivity of the blade control lever (For adjustment of the sensi- tivity of the blade control lever in the lifting direction, carry out adjustment codes 8020 8023 ). q Operating method 1) Operate the blade control lever to the low- ering stroke end of the lifting direction and keep it in that position. 2) Press [F6] and check that the alarm buzzer sounds.

a Even if the adjustment is carried out, the displayed value does not change. a Even if this adjustment code is turned off, the adjustment is effective. a This adjustment code is used to make the controller recognize the maximum lower- ing position of the potentiometer. It is not used to adjust the sensitivity of the blade control lever (For adjustment of the sensi- tivity of the blade control lever in the lifting direction, carry out adjustment codes 8020 8023 ). 60 D155AX-6