30 Testing and adjusting SEN00682-01 Pm Clinic check sheet 1. Engine 2. Cooling fan D155AX-6 9 Machine model Serial No. Service meter User's name Date of execution Inspector D155AX-6 Item Measurement condition Unit Standard value for new machine Service limit value Measure- ment result Accepted Rejected Engine Engine speed Low idling rpm 715 – 765 715 – 765 High idle Without deceleration (Adjustment: 0007) 2,000 – 2,100 2,000 – 2,100 Normal (Deceleration) 1,825 – 1,925 1,825 – 1,925 Decelerator pedal 825 – 925 825 – 925 F3 stall 1,560 – 1,660 1,450 F3 stall + Ripper raise relieve 1,500 – 1,600 1,395 Boost pressure F3 stall kPa {mmHg} Min. 117 {Min.
880} 100 {750} Exhaust temperature Ambient temperature °C — — — — F3 stall 660 700 Blow-by pres- sure F3 stall kPa {mmHO} 2 Max. 2.94 {Max. 300} 3.92 {400} Engine oil pressure High idle MPa {kg/cm²} Min. 034 {Min. 3.5} 0.21 {2.1} Low idle Min. 010 {Min. 1.0} 0.08 {0.8} Item Measurement condition Unit Standard value for new machine Service limit value Measure- ment result Accepted Rejected Fan Speed Adjust- ment: 1005 Low idle rpm — — — — High idle 1,200 – 1,300 1,200 – 1,300 Circuit pressure High idle MPa {kg/cm²}