SEN00718-01 40 Troubleshooting Failure code [CA778] Eng Bkup Speed Sensor Error 1 4 D155AX-6 Action code Failure code Trouble Eng Bkup Speed Sensor Error (Engine controller system) E03 CA778 Contents of trouble • Trouble occurred in engine Bkup speed sensor circuit. Action of controller • Operates with signals of Ne speed sensor. Problem that appears on machine • Running engine stops (when Ne speed sensor is also abnormal). • Stopped engine cannot be started (when Ne speed sensor is also abnormal).
Related information Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective sensor power sup- ply system If code [CA187] or [CA227] is indicated, carry out troubleshooting for it first. 2 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between EGC1 (female) (37) – G (female) (1) Resis- tance Max. 1 z Wiring harness between EGC1 (female) (47) – G (female) (2) Resis- tance Max. 1 z Wiring harness between EGC1 (female) (26) – G (female) (3) Resis- tance Max.
1 z 3 Ground fault in wiring har- ness (Contact with GND cir- cuit) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between EGC1 (female) (37) – G (female) (1) and chassis ground Resis- tance Min. 1 Mz Wiring harness between EGC1 (female) (47) – G (female) (2) and chassis ground Resis- tance Min. 1 Mz Wiring harness between EGC1 (female) (26) – G (female) (3) and chassis ground Resis- tance Min. 1 Mz 4 Short circuit in wiring har- ness (with another wiring harness) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON.
Wiring harness between EGC1 (female) (37) – G (female) (1) and between EGC1 (female) (47) – G (female) (2) Resis- tance Min. 1 Mz Wiring harness between EGC1 (female) (37) – G (female) (1) and between EGC1 (female) (26) – G (female) (3) Resis- tance Min. 1 Mz Chassis ground between EGC1 (female) (47) – G (female) (2) and between EGC1 (female) (29) – G (female) (3) Resis- tance Min. 1 Mz 5 Defective mount of sensor or defective rotation sensing part Check Bkup speed sensor directly for defective mount (defective clearance) or check rotation sensing part (in supply pump) directly for defect.
6 Defective engine Bkup speed sensor If causes 1 – 5 are not detected, engine Bkup speed sensor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) 7 Defective engine controller If causes 1 – 5 are not detected, engine controller may be defec- tive. (Since trouble is in system, troubleshooting cannot be carried out.)