Komatsu D155AX-6 — FAILURE CODE [CA1228] EGR VALVE SERVO ERROR 1

SEN00718-01 40 Troubleshooting Failure code [CA1228] EGR Valve Servo Error 1 1 6 D155AX-6 Action code Failure code Trouble EGR Valve Servo Error 1 (Engine controller system) E02 CA1228 Contents of trouble • Trouble (level 1) occurred in EGR valve servo. Action of controller • Performs open control. Problem that appears on machine Related information • Operating condition of EGR valve can be checked with monitoring function. (Code: 18100 EGR Valve Position) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective related system If another failure code is indicated, carry out troubleshooting for it.

2 Defective engine oil pressure system (main circuit) a For check of engine oil pressure, see Testing and adjusting, Measuring engine oil pressure. Engine Engine oil pressure Low idle 0.08 MPa {0.8 kg/cm2 } High idle 0.21 MPa {2.1 kg/cm2 } If engine oil pressure is abnormal, carry out troubleshooting for "S- 12 Oil pressure lowers" in S mode. 3 Defective oil pump for EGR valve Check oil pump and relief valve for EGR valve circuit directly. 4 Defective oil feed piping for EGR valve Check oil feed piping for EGR valve circuit directly. 5 Defective oil return piping for EGR valve Check oil return piping for EGR valve circuit directly.

6 Defective EGR valve Check mechanical section of EGR valve directly. 7 Defective engine controller If causes 1 – 6 are not detected, engine controller may be defec- tive. (Since trouble is in system, troubleshooting cannot be carried out.)