SEN00603-00 10 Structure, function and maintenance standard Function q Then, the land of the servo piston pressure passage is connected to the pump discharge passage by the notch of spool (5) and the dis- charge pressure is led to the servo piston. q The servo valve controls the current input to the EPC valve and the pump delivery (Q) so that they will be related as shown in the dia- gram. q When the rocker cam is pushed up by the servo piston, a position feedback is applied and lever (2) moves to compress spring (8). q When spool (5) is pushed back, the pump dis- charge circuit and the servo piston circuit are cut off.
q Pressure in the servo piston chamber drops and the rocker cam returns in the direction of a maximum swash plate angle. q These processes are repeated until the swash plate is fixed to a position where the EPC out- put pressure is balanced with spring (8) force. q The greater the EPC output pressure, the smaller the swash plate angle. Conversely, the smaller the EPC output pressure, the greater the swash plate angle. q The output pressure of the EPC valve flows in the piston chamber to push piston (6). q Piston (6) pushes spool (5) until it is balanced with the spring. 12 D155AX-6