SEN00721-01 40 Troubleshooting Failure code [DK30KX] ST lever 1: Out of normal range 1 Failure code [DK30KZ] RL lever: Disconnection or short circuit 1 8 D155AX-6 Action code Failure code Trouble ST lever 1: Out of normal range (Power train controller system) E04 DK30KX Contents of trouble • In PCCS lever steering potentiometer 1 and 2 systems, either of failure codes [DK30KA] and [DK30KB] and either of failure codes [DK31KA] and [DK31KB] occurred simultaneously. Action of controller • Limits operation of engine and transmission. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, travel is limited to F1 and R1.
Related information • State of PCCS lever steering potentiometer signal can be checked with monitoring function. (Code: 50300 S/T Lever 1 Potentio) (Code: 50301 S/T Lever 2 Potentio) • Method of reproducing failure code: Turn starting switch ON + Operate PCCS lever (in steering direction). Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Carry out troubleshooting for failure codes [DK30KA], [DK30KB], [DK31KA], and [DK31KB]. Action code Failure code Trouble ST lever:
Disconnection or short circuit (Power train controller system) E04 DK30KZ Contents of trouble • In PCCS lever steering potentiometer 1 and 2 systems, when starting switch is turned ON, only either side is abnormal and then either of failure codes [DK30KA] and [DK30KB] and either of fail- ure codes [DK31KA] and [DK31KB] occurred simultaneously. Action of controller • Limits operation of engine and transmission. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, it cannot travel at all. Related information • State of PCCS lever steering potentiometer signal can be checked with monitoring function. (Code:
50300 S/T Lever 1 Potentio) (Code: 50301 S/T Lever 2 Potentio) • Method of reproducing failure code: Turn starting switch ON + Operate PCCS lever (in steering direction). Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Carry out troubleshooting for failure codes [DK30KA], [DK30KB], [DK31KA], and [DK31KB].