SEN00722-01 40 Troubleshooting Failure code [DXHBKA] Right brake ECMV: Disconnection 1 18 D155AX-6 Action code Failure code Trouble Right brake ECMV: Disconnection (Power train controller system) E04 DXHBKA Contents of trouble • When signal is output to steering case right brake ECMV solenoid circuit, no current flows. Action of controller • Turns signal to steering case right brake ECMV solenoid circuit OFF. • Limits operation of engine and transmission. Problem that appears on machine • Brake is applied lightly during travel. • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, it cannot travel at all.
Related information • Output to right brake ECMV solenoid can be checked with monitoring function. (Code: 31618 Brake RH ECMV (F/B)) • Method of reproducing failure code: Turn starting switch ON + Operate parking brake lever (Free). Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective right brake ECMV solenoid (Internal disconnec- tion) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON.
SBRR (male) Resistance Between (1) – (2) 3.5 – 12.5 z 2 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between STC3 (female) (15) – SBRR (female) (1) Resis- tance Max. 1 z Wiring harness between STC3 (female) (3) – SBRR (female) (2) Resis- tance Max. 1 z 3 Hot short (Short circuit with 24V circuit) in wiring harness a Prepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Wiring harness between STC3 (female) (15) – SBRR (female) (1) and chassis ground Voltage Max.
1 V 4 Defective power train con- troller a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. STC3 (female) Resistance Between (15) – (3) 3.5 – 12.5 z