Komatsu D155AX-6 — DAMPER, UNIVERSAL JOINT

10 Structure, function and maintenance standard SEN00604-00 1. Breather 2. Dipstick 3. Drain plug 4. Output shaft 5. Flywheel 6. Outer body 7. Coupling 8. Universal joint 9. Cover 10. Rubber coupling 11. Inner body Unit: mm Outline q The damper, dampens the torsional vibration caused by the change in engine torque and the impact torque generated when accelerat- ing suddenly or when carrying out heavy-duty digging. In this way, it acts to protect the torque converter, transmission, and other parts of the power train. q The damper has few component parts: it uses a rubber coupling, so the vibration is absorbed by the damping effect of the rubber material.

Operation q The motive force from the engine passes through flywheel (5) and is transmitted to outer body (6). The torsional vibration of the engine is absorbed by rubber coupling (10), and the power is trans- mitted to inner body (11). It passes through uni- versal joint (8), and is then transmitted to the torque converter and transmission. D155AX-6 9 No.

Check item Criteria Remedy 12 Clearance between flywheel housing and cover Standard size Tolerance Standard clearance Clearance limit Replace Shaft Hole 511.18 –0.022 –0.092 +0.070 +0.070 0.022 – 0.162 0.2 13 Clearance between flywheel and damper 466.72 –0.020 –0.083 +0.063 +0.070 0.020 – 0.146 0.2 14 Outside diameter of coupling oil seal contact surface Standard size Tolerance Repair limit 90 –0.087 –0.087 89.8