Komatsu D155AX-6 — E-6 EMERGENCY STOP ITEM LIGHTS UP WHILE ENGINE IS RUNNING

SEN00807-01 40 Troubleshooting E-6 Emergency stop item lights up while engine is running 1 20 D155AX-6 Trouble (1) Engine coolant temperature monitor lights up. Related information • Signals of engine coolant temperature sensor are input to engine controller and then transmitted to machine monitor through communication system. • Engine coolant temperature can be checked with monitoring function. (Code: 04107 Coolant Temperature) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Overheating of engine cool- ant (when system is normal) Engine coolant may be overheated. If it is overheated, remove cause.

2 Defective engine coolant temperature sensor system If cause 1 is not detected, engine coolant temperature sensor sys- tem may be defective. Carry out troubleshooting for failure codes [CA144] and [CA145]. 3 Defective machine monitor If causes 1 and 2 are not detected, machine monitor may be defec- tive. (Since trouble is in system, troubleshooting cannot be carried out.) Trouble (2) Engine oil pressure monitor lights up. Related information • Signals of engine oil pressure sensor are input to engine controller and then transmitted to machine monitor through communication system. • Engine oil pressure can be checked with monitoring function. (Code:

37200 Engine Oil Pressure) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Lowering of engine oil pres- sure (when system is nor- mal) Engine oil pressure may be low. If it is low, remove cause. 2 Defective engine oil pressure sensor system If cause 1 is not detected, engine oil pressure sensor system may be defective. Carry out troubleshooting for failure codes [CA135] and [CA141]. 3 Defective machine monitor If causes 1 and 2 are not detected, machine monitor may be defec- tive. (Since trouble is in system, troubleshooting cannot be carried out.) Trouble (3) Power train oil temperature monitor lights up.

Related information • Signals of torque converter oil temperature sensor are input to power train controller and then trans- mitted to machine monitor through communication system. • Power train oil temperature can be checked with monitoring function. (Code: 30100 T/C Oil Temperature) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Overheating of power train oil (when system is normal) Power train oil may be overheated. If it is overheated, remove cause. 2 Defective power train oil tem- perature sensor system If cause 1 is not detected, power train oil temperature sensor sys- tem may be defective.

Carry out troubleshooting for failure codes [DGT1KA] and [DGT1KX]. 3 Defective machine monitor If causes 1 and 2 are not detected, machine monitor may be defec- tive. (Since trouble is in system, troubleshooting cannot be carried out.)