Komatsu D155AX-6 — E-19 ALARM BUZZER CANNOT BE STOPPED

SEN00807-01 40 Troubleshooting E-18 Float mode does not change 1 E-19 Alarm buzzer cannot be stopped 1 32 D155AX-6 Trouble (1) When float mode switch is operated, float mode monitor does not light up or go off. Related information Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Machine monitor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) Trouble (2) When float mode is changed, setting of machine is not changed.

Related information Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Machine monitor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) 2 Defective pump controller Pump controller may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) Trouble • Alarm buzzer cannot be stopped. Related information Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Machine monitor may be defective.

(Since trouble is in system, troubleshooting cannot be carried out.)