OPERATION SAFETY LOCKS AND SECURITY It is the operator or person performing maintenance on the machine who is responsible for the security of the machine and its work equipment. Failure to safely secure the machine may result in personal injury, injury to other personnel or tampering by unauthorized personnel. Always secure the machine when not in use. IGNITION SWITCH KEY Always remove the ignition ley when leaving the machine even for a moment. Failure to do so may result in access to machine by unauthorized personnel. DOOR LOCK Before the releasing the door lock, always stop the machine on flat ground. Never release the door lock on a slope. The door may suddenly close and cause injury.
When releasing the door lock, do not extend your body or hands outside the machine and do not put your hands on the door frame. The door may suddenly close and cause injury. Use the door lock to fix the door in position after opening it. 1. Push the door against catch (1) to secure it in the open position. 2. To release the lock, press knob (2) down at the left side of the operator's seat to release the catch. 3. When securing the door, secure it firmly to the catch. CAP, COVER WITH LOCK Locks are installed on the fuel tank filler, hydraulic tank filler, opera- tor's cab, engine hood, battery box cover, right side door of the machine, and left side door of the machine.
Use the starting key to open and close the caps, doors and covers. Insert the key as far as it will go, then turn it. If the key is turned before it is inserted fully, it may break. 2-48 PC300LC/HD-7E0