OPERATION FAN SWITCH This switch (2) is used to adjust the air flow. The air flow can be adjusted to six levels. Press the switch to increase the air flow; press the switch to reduce the air flow. During auto operation, the air flow is automatically adjusted. Monitor Display And Air Flow TEMPERATURE SET SWITCH This switch (3) is used to control the temperature inside the cab. The temperature can be set between 18°C (64.4°F) and 32°C (89.6°F). Press the switch to raise the set temperature; press the switch to lower the set temperature. The temperature is generally set at 25°C (77°F). The temperature can be set in stages of 0.5°C (0.9°F).
Monitor display and the function Remark If the mode is set to auto mode and the temperature setting is set to 18.0 ° C (64.4 ° F) and 32.0 ° C (89.6 ° F), the air flow from the fan is always set to HIGH and does not change even when the set temperature is reached. PC300LC/HD-7E0 2-53 Liquid crystal display Air flow Air flow “low” Air flow “medium 1” Air flow “medium 2” Air flow “medium 3” Air flow “medium 4” Air flow “high” Monitor display °C (°F) Set temperature 18.0 (64.4°F) Max. cooling 18.5 to 31.5 (65.3°F to 88.7°F) Adjusts temperature inside cab to set temperature 32.0 (89.6°F) Max. heating