Do not carry out demolition work under the machine. This may cause a hazard as the machine could become unstable and tip over. When work- ing on the top of buildings or other structures, check the support strength before starting operations. The support may collapse and cause serious injury or damage. OPERATION Determine the signals to be used and place a signalman in position. To prevent the machine from tipping over or falling, carry out the oper- ation on flat ground. To prevent the danger of contact with a raised load or the danger from a falling load, do not allow any worker inside the area. Do not exceed the specified lifting load.
It is dangerous if the raised load hits any person or structure. When swinging or operating the work equipment, check carefully that the sur- rounding area is safe. Do not swing or operate the work equipment suddenly. There is danger that this may cause the load to sway and the machine to tip over. Do not leave the operator's seat when there is a raised load. Do not use the work equipment or swing to pull the load in any direc- tion. There is danger that the hook may break and the load come off, causing the work equipment to move suddenly and cause personal injury. . Do not dig the bucket into the ground and use the travel force to carry out excavation.
This will damage the machine or work equipment, cause loss of control or possibly injure the operator. PC300LC/HD-7E0 2-111