OPERATION SECURING MACHINE Stow the antenna and reassemble the mirrors so that they are within the width of the machine. To prevent damage to the bucket cylinder during transportation, fit a wooden block at one end of the bucket cylinder to prevent it from touching the floor. Load the machine onto a trailer as follows: 1. Extend the bucket and arm cylinders fully, then lower the boom slowly. 2. Set the lock lever securely to the LOCK position (L). 3. Stop the engine, then remove the key from the ignition switch. 4. Close all doors, windows, and covers. Lock the covers, caps, and doors fitted with locks. 5.
Place blocks under both ends of the tracks to prevent the machine from moving during transportation, and secure the machine with chains or wire rope of suitable strength. 6. Be particularly careful to secure the machine in position so it does not slip to the side. PC300LC/HD-7E0 2-125