MAINTENANCE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT If inspection, cleaning, or maintenance is done with the engine running, dirt will enter the engine and cause damage to the engine. Stop the engine before carrying out these operations. Flying dirt could cause personal injury when using compressed air. Wear protective glasses, dust mask, or other protective equipment. It is dangerous to pull the outer element out from the air cleaner body by force. When working at high places or where the foothold is poor, be careful not to fall because of the reaction when pulling out the outer element.
Do not clean the air cleaner element until the air cleaner clogging monitor on the monitor panel flashes. If the element is cleaned frequently before the clogging monitor flashes, the air cleaner will not be able to display its performance fully, and the cleaning efficiency will also go down. In addition, during the cleaning operation, more dirt stuck to the element will fall inside the inner element. If inspection, cleaning, or maintenance is carried out with the engine running, dirt will enter the engine and cause damage to the engine. Always stop the engine before carrying out these operations.
CHECKING If air cleaner clogging monitor (1) of the monitor panel flashes, clean the air cleaner element. REPLACING Replacing element, O-ring If one year has passed since installing the element or if air cleaner clogging monitor (1) on the monitor panel flashes immediately after the element is cleaned, replace the outer element, inner element, and O-ring. Replacing evacuator valve Replace it if it is damaged or the rubber is markedly deformed. 3-20 PC300LC/HD-7E0