Komatsu — PRECAUTIONS FOR ATTACHMENT REMOVAL AND INSTALLATION

OPTIONS, ATTACHMENTS GENERAL PRECAUTIONS Install only Komatsu authorized attachments and options; those not authorized by Komatsu authorized will affect the life of the machine and could cause safety problems. When installing attachments not listed in this Operation and Maintenance Manual, contact your Komatsu distributor first. If you do not contact Komatsu, we cannot accept any responsibility for any accidents or failures PRECAUTIONS RELATED TO SAFETY Attachments are powerful tools. To prevent serious injury or damage, use the attachment correctly.

Read the instruction manual for the attachment thoroughly, and do not use the attachment unless you are sure that you have understood the guidelines completely. If you lose the instruction manual, ask the manufacturer or attachment sales company for a new copy. Depending on the attachment, install the necessary front guard to the machine. Depending on the attachment, the impact noise may make it difficult for fellow workers to transmit instructions for the operation. Before starting operation, decide upon a leader and determine the signals to be used. Do not perform swinging operations to the side with a heavy load on the attachment. This is particularly dangerous on slopes.

A machine equipped with a breaker instead of a bucket has a heavier load at the front of the work equipment and is unsta- ble. To avoid the danger of tipping over, do not perform operations with the attachment swung to the side. When an attachment is installed, the swing range and center of gravity of the machine is different, and the machine may move in unexpected ways. Be sure that you understand the condition of the machine with a particular attachment. Place a fence around the machine to prevent people from entering the work area, before beginning operations. Never oper- ate the machine when there are people near by.

To prevent serious mishaps caused by accidental operation, do not rest your foot on the pedal unless the pedal is locked. Use the foot pedal only when traveling or operating attachments. PRECAUTIONS FOR ATTACHMENT REMOVAL AND INSTALLATION When removing or installing the attachment, do as follows to ensure safety. Remove and install attachments on firm, level ground. When working with two or more workers, determine the signals and follow these during the operation. Use a crane when you lift or carry heavy objects (more than 25 kg or 55 lb). When removing heavy components, support the component before removing it.

When lifting with a crane, be particularly careful about the position of the center of gravity. It is dangerous to leave a load raised by a crane. Prepare a stand and ensure that the condition is safe. When removing or installing an attachment, make sure that it is in a stable condition and cannot fall over. Never go under a load raised by a crane. Stay in a safe place where there is no danger if the load should fall. Remark Qualifications are required to operate a crane. Never allow the crane to be operated by an unqualified person. For details of removal and installation operations, contact your Komatsu distributor. 5-2 PC300LC/HD-7E0