OPTIONS, ATTACHMENTS REPLACE ADDITIONAL BREAKER FILTER ELEMENT The parts and oil are at high temperature after the engine is stopped, and may cause serious burns. Wait for the temperature to go down before cleaning the engine breather. When using compressed air, there is a hazard that dirt may be blown up and cause serious injury. Always use safety glasses, dust mask, or other protective equipment. 1. Prepare a container for draining oil. 2. Place the container under the filter element. 3. Turn filter case (1) counterclockwise to remove it. Remove element (2) from the case. 4. Unscrew plug (3) from filter case (1). 5. Clean the removed parts. Mount a new element (2) and O-ring (4). 6.
After the case reaches the filter holder, additionally tighten the case by more than one-half turn. 5-12 PC300LC/HD-7E0