Komatsu — MAIN APPLICATIONS

OPTIONS, ATTACHMENTS HYDRAULIC BREAKER When using a hydraulic breaker attachment it is important to change the hydraulic oil every 500 hours instead of 1000 hours. “See EVERY 1000 HOURS MAINTENANCE” (3-60) for servicing information. MAIN APPLICATIONS Crushed rock Demolition work Road construction This attachment can be used for a wide range of work including building demolition, breaking up of road surfaces, tunnel work, break- ing up slag, rock crushing, and breaking operations in quarries. Keep the chisel pushed perpendicularly against the impact surface when carrying out breaking operations.

When applying impact, push the chisel against the impact surface and operate so that the chassis rises approximately 5 cm (2 in) off the ground. Do not let the machine rise further off the ground than this amount. When applying continuous impact to the same impact surface, if the chisel does not penetrate or break the surface within one minute, change the point of impact and carry out breaking operations closer to the edge. 5-20 PC300LC/HD-7E0