OPERATION TRAVEL SPEED MONITOR This monitor (6) displays the set mode for the travel speed. When the travel speed selector switch is operated the monitor displays one of the following selections. LO : Low speed MI : Medium speed HI : High speed POWER MAX MONITOR This monitor (7) shows if the power max function is being actuated. The monitor display (when the knob switch on the left control lever is operated) is as follows. Monitor lights up Digging power is increased while knob switch is kept pressed. Remark The digging power is increased while the knob switch is being pressed only for working modes P and E.
Note that even if the knob switch is kept pressed, the increase in power ends after 8.5 seconds. When the knob switch is pressed, the mode is displayed in the central portion of display GG. After 2 seconds, the moni- tor in the center goes out and the monitor display changes to screen BB Monitor goes out : Power max function stopped 2-18 PC300LC/HD-7E0