OPERATION WORKING MODE SELECTOR SWITCH This switch (1) is used to set the power and movement of the work equipment. Operations can be carried out more easily by selecting the mode to match the type of operation. Remark When using breaker, do not use the P mode. There is a danger the breaker may be damaged. P mode : For heavy-load operations E mode : For operations with emphasis on fuel economy L mode : For fine-control operations B mode : For breaker operations When the engine is started, the working mode is set automatically to P mode. When the switch is pressed, other modes are selectable. The monitor display GG on the monitor display portion changes for each mode.
If it is desired to have the working mode set to start automatically in E, L, or B mode (default options setting), please ask your Komatsu distributor to change the setting. Remark When the mode selector switch is pressed, the mode is displayed in the center of the monitor display (GG), and the screen returns to the normal screen (BB) after 2 seconds. (The diagram on the right is an example of the display for the E mode.) 2-22 PC300LC/HD-7E0