Komatsu — MAINTENANCE SWITCH

OPERATION MAINTENANCE SWITCH This switch (6) is used to check the time remaining to maintenance. When this switch (6) is pressed, the screen on the monitor display changes to the maintenance screen shown in the diagram on the right. The time remaining to maintenance is indicated by the color of each monitor display. After confirming the maintenance time, carry out the maintenance. White display More than 30 hours remaining to maintenance Remark If the monitor display (GG) changes to the maintenance warning screen when the engine is started or when the machine is being operated, stop operations immediately.

When this happens, the monitor corresponding to the maintenance warning screen will light up red. Press switch (6) to display the maintenance screen and check to be sure there is no abnormality in any other monitor. If another monitor is lit up red on the maintenance screen, carry out maintenance for that item also. The maintenance display items are as follows. If it is desired to change the setting for the maintenance interval, please contact your Komatsu distributor. 2-26 PC300LC/HD-7E0 Yellow display Less than 30 hours remaining to maintenance Red display Maintenance time has already passed Monitor No.

Maintenance Item Default set screen (H) 01 Change engine oil 500 02 Replace engine oil filter 500 03 Replace fuel filter 1000 41 Replace fuel pre-filter 500 04 Replace hydraulic oil filter 1000 05 Replace hydraulic tank breather 500 06 Replace corrosion resistor 1000 07 Check damper case oil level, add oil 1000 08 Change final drive case oil 2000 09 Change swing machinery case oil 1000 10 Change hydraulic oil 5000