OPERATION Machines equipped with travel alarm (If equipped). WORK EQUIPMENT CONTROL LEVER If any lever is operated when in the deceleration range, the engine speed will suddenly increase, so be careful when operating the levers. The left equipment control lever is used to operate the arm and upper structure. ARM OUT ( a ) SWING LEFT ( d ) NEUTRAL ( N ) SWING RIGHT ( c ) ARM IN ( b ) When the lever is in the neutral (N) position, the upper structure and the arm will be retained in the position in which they stop. The right equipment control lever is used to operate the boom and bucket.
BOOM LOWER ( b ) BUCKET CURL ( d ) NEUTRAL ( N ) BUCKET DUMP ( c ) BOOM RAISE ( a ) When the lever is in the neutral (N) position, the upper structure and the arm will be retained in the position in which they stop. 2-40 PC300LC/HD-7E0