. OPERATION OPERATION OPERATION OPERATION cracks, embedded foreign materials, mount portion (1) and front mount portion (2). any 3 - 65 8. Check dump body mou Check that there are n or 9. Check for damage to h Repair any damage an 10. Check for damage to g auges, lamp on the instrument Check for damage to t he panel, gauges and l amps. If any problem is found, replace t he parts. Clean off on the surface. Tighte 11. Check rear view mirror , under view mirror. Check that the mirrors are not damaged. Replace th em if they are damaged. Clean the surface of the an d adjust the angle so that the operator can see the a rea to the rear and under the m achine from the op se at. 12.
Check for damage to th e seat belt and mounting clam ps. Check for damage to s Check that there ar loose bolts are foun torque. When the belt has b the clamps are brok Check for damage to s eat belt and mounting clamps. If damages a re found, replac e with the new one. Check that there ar e no loose bolts in the mountin g clamps mountin g the seat b elts to the machine oose bolts are foun d, contact your Komatsu distri butor and have them tightened to the specified tig orque. When the belt has b een used for a long time, if any external damage or fraying o f the belt can be se he clamps are brok en or deformed, replace the se at belt Ass'y.