Komatsu — DUMP OPERATIONS

. OPERATION OPERATION NOTICE LOWER position. The 3 - 115 When raising the dum p body, reduce the pressure on the a ccelerator p edal when t he dump body c omes close to the max imum angle. If the dump bo dy is raised to the maximum h eight a t a hig h lifting speed, th e hoist c ylinder s will suffer im pact loa d and may be damaged. Regardless of the pos ition of the gear shift lever, i f the pa rking b rake switch is at the "TRAVEL" position and t he dump body is raised, the speed r ange is fixed at 1st. Lower th e dump body before 3. If it is necessary to raise the dump body further, op erate dum lever (3) to the further. If dump le to the HOLD pos position.

RAISE position and rais e the dump bod ver (3) is released, dump l ever ( 3) will retur ition and the dump body will stop at tha bod 4. When dump lever (3) is moved to the dump body will st art to move down. 5. When the dump body has moved down a certa in distance move dump lever released, it will ret will then move do (3) to the FLOAT position. (When the le ver i urn to the FLOAT position .) The dump bod wn under its own weight. The dump control is carried out electrically. If there is an y problem in th e sensors or valves, a fa ilure co de is displayed and the du mp body is held in positio n.

If it is desired to move th forcibly nspecti repair, please ask you r Komatsu distributor to c arry o ut the operation.