. OPERATION TRANSPORTATION METHOD OF LIFTING MACHINE WARNING Never try to lift the machine in any posture other than the posture given in the procedure below or equipment other than in the procedure below. There is a hazard that the machine may lose its balance. please consult your Komatsu (PAGE 5-2)" 3 - 128 When lifting the machine at a p ort or any other place, always use th e following procedure t o lift it. When carrying out lifting operation s, if mistakes are made in the operation, t here i s danger that the m achine wil l fall and cause serious personal injury.
Always do Always make sure that the wire rope is of ample strength for the weight o f this In order to prevent the wire rop e from being cut, use protective material at places w here the wire rope may catch on sharp corners. When raising the machine, keep Do not go under a raised machi ne or let any other person enter the area a round the machine. Do not lift the machine when th Stop the engine, then set the pa rking brake switch to the PARKING positi on to a pply the parking b rake. using lifting This method of lifting applies to the standerd specification machine. s installed.
The method of lifting differs ac cording to the attachments and option s installe For details of the procedure fo distributor. r machines that are not tha standard specification For the weight of the standard specification machine, see "SPECIFICATIONS When using a spreader bar, us e a size that will not come into contac t with the machine. Please consult your Komatsu d istributor before carrying out lifting w ork.