Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION LIFTING PROCEDURE CAUTION the ground (raised 10 - 20 cm), stop and check carefully that the machine is 3 - 130 Lifting wo rk can be carried out only with machines display ing a lifting mark. When ca rrying out the lifting operati on, stop the machine on firm l evel ground, an d do as follows. 1. Start the engine , set the dump le ver to the FLOAT posit ion, and chec k that the body pilot lamp g oes out. 2. Stop the engin 3. Set t he parking brake switch to t he PARKING position to apply the oper parking b rake, and chec k that the area around the ator's compartment is safe. suffer inju ry to your h ands if you carry o ut the operation with bar e hands. 4.

Use wire rope, slings, and spre ader bars to match th e weight of the machine , and fit the wire rope to the lifting point s. REMARK The liftin g positions for the machine differs according to th e condition Machine with body :Positions (1) an d (3) 2 at front, 2 at rear) and (2) s (2 at front, 2 at rear) Total:4 places ( Machine without body:Positions (1) Total:4 place s (2 at front, 2 at rear) 5. Fit pr otector blocks at the conta ct points between the lifting equipment and th e body to preve nt damage t o the King equipmen t. 6. Whe n the machine comes off t balan ced and t hat the wire rope 7. Rais e the machine slowly, then lower it to the target p