. OPERATION TROUBLESHOOTING STARTING ENGINE WITH BOOSTER CABLE When starting the engine with a booster cable, do as follows. PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING of the problem machine. 3 - 143 If any mistake is made in the method of connecting the booster cables, the battery may explode. Always do as follows. When starting the engine using a booster cable, always wear protective glasses and rubber gloves. When connecting booster cables , always connect to a machine that has the same battery voltage as the p roblem machine. When starting the engine using a booster cable, always use two workers for the starting operation:
one sits in the operator's seat, the other ery. carries out the work with the batt When using a normal machine t o start a problem machine, be careful not to let the normal machine an d problem machine touch each other. When connecting the booster ca bles, turn the starting switches OFF on both the normal machine and the problem machine. There is danger that the machine may move when the electric power is connected. e (+) cable first when installing the Be sure to connect the positiv booster cables. Disconnect the ground (negative (-)) cable first when removing them. When removing the booster cable , be careful not to let the booster cable clips contact each other or the m achine.
The size of the booster cable and clip should be suitable for the battery size. The battery if the normal ma chine must be the same capacity as that of the problem Check the cables and clips f or damage or corrosion. o that they do not come off. Connect the clips securely s CONNECTING THE BOOSTER C Keep the starting switch of the normal machine and problem machine in the OFF positio Connect the booster cable as fo llows, in the order of the numbers marked in the diagram 1. Connect one clip of boost terminal of the problem mac 2. Connect the other clip of bo terminal of the normal mach 3. Connect one clip of boost terminal of the normal mach 4.
Connect the other clip of bo oster cable (B) to the engine block