Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CHECK LENGTH OF CYLINDER Front suspension cylinder cover is within on the label when the machine is unloaded and on flat ground. After checking, contact your Komatsu distributor for repairs if any problem is found. 4 - 36 CHECK LENGTH OF SUSPENSION CYLINDER, CHECK OIL LEVEL When traveling, if the unevenness of the ro ad surface is transmitte d directly to the chassis (the machine bounces or the cylinders r etract and hit the stopper), carry out the following checks.

Check ottom range (A) shown by th e arrow At the same time , whe n the machine is not lo aded, remove cover (1) , then measure dimensi on (B) from the shoulde of the rod head of the suspension cylinder t o the t op surface of the flange. (B) 223 - 243 mm (8.8 - 9.6 in) Reference (C) 441 - 461 mm (17.4 - 18.2 in) Flange thickness (D) 50 mm (2.0 in)