. MAINTENANCE SERVICE PROCEDURE CLEAN, CHECK RADIATOR FINS AND AFTER COOLER FINS WARNING breathe it in, it may affect your lungs. To prevent this, always wear protective glasses, anti-dust mask, and other protective equipment clamps. can be 4 - 44 If c ompressed air is used t o carry out the cleaning, d ust will fly. If dust gets into your eyes, you may lose your eyesight; if you If r adiator fins (1) or afte rcooler fins (2) become clogged or bent, it wil l cause overheating o f the engine, carrying ou t inspectio n about clogged or vent of fin. radiator fin.
When vent Komatsu distributor for r Cleaning can be carri but be careful not to l When using compres ed out by using jets of ai et the nozzle contact th sed air or steam, keep th angle to the radiator a Examine the rubber h ose, and if any cracks o r brittle pla ces are se. In addition, check a se hose NOTICE If steam jet nozzle (3) is b rought too close to fins (4), the fins If s damaged, so keep a good distance in between when Us e the following values as Jet pressure: Lower tha Nozzle diameter: Less th Distance between nozzl e and fin (A): More than 10 0 mm