Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING the machine does not shift lever at N position. If any problem is found, ask your Komatsu distributor for repair. 4 - 60 When ch ecking the braking capacity of th e retarder brake, there is danger th at the machine may sudd enly move and be damaged or cause serious personal injury.

Always Select a wide, flat area with sufficient distance to make it possible to sto p the machine if it sudde If the machine suddenly moves when the braking capacity of the retard er brake is being checked , reduce the engine speed immediately, move the gear shift lever to the N position, and depress th e foot brake to stop the m If insp ection is carried out when the dump body pilot lamp is lighted u p and the shift indicator is at F1, there is danger of dama ge to the internal parts of the tra When carrying out inspection, seat the dump body securely and check t hat the body pilot lamp ha s gone out.

In addition, set the ge ar shift lever to the "D" position and check that the shift indicator Check t he braking capacity of the re 1. Sto (1) f 2. Set spe the mov 3. Low . Sto p the machine on flat ground engine speed reaches 1400 e, it is normal. er the engine speed, set ge NOTICE If t he du mp body is not seated and the pa rking brake is at "TRAVEL", the sp eed range is set to F1, eve n when the gear shift lever is at the "D" position.