Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK, CLEAN AUTOMATIC SUSPENSION (If equipped) WARNING 4 - 62 When checking or cleaning the automatic s ine suddenly moves durin uspension, al ways do a follows. If the mach g the inspection, there i ry. danger that it may c ause serious personal inju One person shou ld sit in the operator's sea t so that the en gine can b stopped at any ti time. me. All workers should be in communication all th Set the parking b rake switch to the PARKIN G position, the n put block under the tires to prevent the machine from moving. perating the d ump contro Do not touch the gear shift lever.

Before o lever, always giv e a signal to the o ther wor kers and have them mov back to a safe pla ce. . When bolts of inspection cove r (1) are loosened an d the cove is moved to th e side. The inspection h ole can be s . Check the pos ition of the link. Check that it m oves to the following p For mormal tra vel when empt y: soft (A When the brak e is depressed: mediu When the dum p lever is at any position other than FL OAT: har (C) If any problem is f ound, please contact yo ur Komatsu d istributor for inspection and If operations are c arried out on muddy or w et ground, mu d will stic k to the link, and the movement may bec ome slow so check and clea n.