Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE TRANSMISSION AND REAR BRAKE COOLING OIL FILTER ELEMENT WARNING to release the internal 4 - 78 Immediately a fter the engi ne is st opped, the parts an d oil are at high temperature, and there is danger that this may cau se burns during the oil level check operati on. Wait fo r the temperatu re to go down b efore starting When looseni ng the cap, d o not l oosen it su ddenly. L oosen it gradually. Th e inside of the c ase is under high pressure , so if the ca p is loosene d suddenly , oil ma y spurt ou t and cause bur 1. pressure, t hen remov e the c 2. Remove bo lt (1), then remo ve cover ( 3.

Remove O -ring (3), s pring ( 4), valve (5), element ( 6), and the strainer (7) , then was h the i nside of t he case and o f the valve and straine r. new element, then install the strainer, element, spring. -ring thinly with clean oil, then install it. r (2) with bolts (1). 4. Prepare a valve, and 5. Coat the O -ring thinly with c lean oil, t 6. I nstall cove r (2) with b olts (1 I f the filter Main tenance ca ution l amp (if eq uipped) lights up when the e ngine water t emperature gauge is in t he white rang e and the engine is r unning at 1200 t o 2100 rpm, r eplace the element immedi