MAN — Man EPA07 MBE 4000 Engine Operator's Manual

ENGINE BRAKE SYSTEM Descending a Long, Steep Grade lifting your foot briefly off the throttle. You should feel the system activate. An explanation of “control speed” may be helpful in understanding how to use the engine brake system while descending a grade. Control Speed is the constant speed at which the forces pushing the vehicle forward on a grade are equal to the forces holding it back, without using the vehicle service brakes. In other words, this is the speed the vehicle will maintain without using the service brakes or fueling. 2. Ensure the progressive braking switch is in the appropriate power position.

PERSONAL INJURY Failure to keep the vehicle within safe control speed limits while descending a grade may result in loss of vehicle control, which could cause personal injury. To avoid injury, do not over apply the vehicle service brakes when descending a long, steep grade. Excessive use of the vehicle brakes will cause them to heat up, reducing their stopping ability. This condition, referred to as “brake fade”, may result in loss of braking, which could lead to personal injury or vehicle/property damage or both. BRAKE FADE NOTICE: Failure to keep the vehicle within safe control speed limits while descending a grade may result in vehicle or property damage or both. 3.

Do not exceed the safe control speed of your vehicle. Example: You could descend a 6% grade, under control only at 16 kph (10 mph) without an engine brake, but at 40 kph (25 mph) with an engine brake. You could not descend that same hill at 80 kph (50 mph) and still expect to remain under control. Get to know how much slowing power your engine brake can provide. So get to know Use the following guidelines when descending a long, steep grade: 1. Before beginning the descent, determine if your engine brake system is operating properly by 54 All information subject to change without notice. DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION