MAN — Man EPA07 MBE 4000 Engine Operator's Manual

MAINTENANCE The torsional damper coupling will withstand normal exposure to hydraulic oil, diesel fuel, anti-freeze solutions, and muriatic acid. The coupling should be washed with a mild soap solution and rinsed with water after contact with the above items. The coupling can be power washed without damage as long as it is installed in the vehicle. If the coupling is power washed when not connected to a cardan shaft, debris may be forced internally at the bolt flanges damaging the coupling. positioned to avoid chafing, and properly secured. Required Maintenance Operations The following sections describe the required maintenance operations . Engine Inspecting Inspect engine as follows: 1.

Visually check the engine for signs of leakage. A slight dampness at the sealing points is no cause for concern. NOTE: More severe leaks, combined with a continual loss of oil, must be corrected without delay. 2. Visually inspect all lines and hoses. Listen for any sound of leaking. Make sure all pipes and hoses are undamaged, correctly 80 All information subject to change without notice. DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION