Komatsu — 3.5.6.1 STANDARD SEAT

GUARDS, CAB AND DRIVER’S SEAT 3.5.6 SEAT 3.5.6.1 STANDARD SEAT The seat offers four adjustment options: a - longitudinal position; 1 b - back inclination; c - degree of suspension, in order to dampen the inevitable vi- brations and jumps as much as possible; d - height and cushion inclination; 3 4 The operator can choose the driving position that is most suitable for his physical structure and according to the angular adjustment of the steering wheel.

The longitudinal adjustment of the seat (1) is obtained by operat- ing the lever (2) and making the seat slide on the guides; once the desired position has been found, release the lever and carry out slight movements, in order to make sure that the lock pin is prop- erly fitted in its seat. 5 The adjustment of the back is obtained by operating the levers (3) and at the same time exerting pressure with the back; the back will automatically adapt to the physical structure of the operator. The adjustment of the suspension is carried out with the lever (4) and can be controlled by observing the position of the indicator (5).

6 2 RKAA1150 The operator must carry out this adjustment while seated; the right suspension degree is reached when the indicator is posi- tioned in correspondence with the seat frame. If the indicator protrudes from the frame, it is necessary to operate the lever (4) with the (+) mark on the grip towards the operator; if the indicator is positioned inward with respect to the frame, the le- ver (4) must be operated with the (–) mark on the grip towards the operator. The seat cushion inclination and height can be adjusted by means of the lever (6); three height positions and five different in- clination positions are available. 124