Komatsu — 3.10.5 PRECAUTIONS TO BE TAKEN AT THE END OF WORK

PRECAUTIONS TO BE TAKEN IN THE COLD SEASON AND IN COLD PLACES 3.10.4 OTHER PRECAUTIONS 1 - Before using the machine in normal operating conditions, carry out some slow movements both forward and in reverse. With the machine in WORK mode, operate the boom slowly, performing some complete movements, and if possible operate also the equipment-carrier. These operations serve to warm up and fluidize the oil in the hydraulic circuit, the transmission, the axles and the brakes. 3.10.5 PRECAUTIONS TO BE TAKEN AT THE END OF WORK 1 - Remove mud and water completely from the machine body.

Park the machine on firm ground; if the machine must be parked near banks or ditches, park it on wooden boards in order to distribute the weight of the machine on a larger surface. 2 - Be careful to water drops forming on the hydraulic cylinder rods: these drops must be completely removed, since if they freeze the cylinder gaskets may be damaged. After removing the water drops, protect the rods with oil. 3 - Drain the condensate that may have formed in the tank and in the water separator, to prevent the water from freezing during the night.

4 - Since the battery capacity may decrease considerably at low temperatures, after work cover the battery or re- move it and store it at a suitable temperature. 143