Komatsu — 4.3.1 HOMOLOGATED SYNTHETIC BIODEGRADABLE LUBRICANTS “HEES”

FUEL, COOLANT AND LUBRICANTS 4.3.1 HOMOLOGATED SYNTHETIC BIODEGRADABLE LUBRICANTS Our machines can be filled with synthetic biodegradable hydraulic oil type HEES not of plant origin and therefore the use of the oils indicated in the following table is authorized and recommended: It is not possible to mix the synthetic biodegradable oil type HEES with conventional hydraulic oils, since when the temperature increases insoluble compounds are generated, which are deposited on the filters and clog them (the maximum concentration of conventional oil cannot exceed 1% of the total quantity of oil).

Synthetic biodegradable oil can be used only in the hydraulic system; it cannot be used for the engine, the transmissions, the braking system, etc. Before introducing biodegradable oil in the hydraulic system, empty the system completely, disconnect- ing the cylinders and all the parts that may contain conventional oil, and replace the drain filter with a new one. Start the engine and let it idle without using the work equipment , wait until the oil reaches a temperature of at least 40°C, then start moving the equipment, so that all the parts of the system are filled with oil. Stop the engine and check the oil level (see «4.7.8.c CHECKING THE HYDRAULIC OIL LEVEL»).

176 SUPPLIER SYNTHETIC BIODEGRADABLE OIL “HEES” KOMATSU – AGIP ARNICA S 46 ARAL HEF 46 vitam AVIA SYNTOFLUID N 46 BP BIOHYD SE-S 46 CONDAT CONDAT D 46 K ELF HYDRELF BIO 46 ESSO HYDRAULIKOIL HE 46 FINA BIOYIDRAN TMP 46 SE 46 FUCHS PLANTOHYD S 46 KENDALL SYNTH NATURA 46 HV KUWAIT PETROLEUM Q8 HOLBEIN 46 MOBIL EAL SYNDRAULIC MOBIL (USA) ENVIROSYN 46 H PAKELO GEOLUBE HYDRAULIC EP-46 PANOLIN HLP SYNTH 46 SHELL NATURELLE HFE-46 TAMOIL GREEN HYDRO SAFETY 46 TEXACO HYDRA 46 TOTAL EQUIVIS BIO 46 VALVOLINE UNISYN HLP 32/68 ATTENTION