TECHNICAL DATA 5.1.3 VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED According to the results of the tests carried out to determine the vibrations transmitted to the operator by the ma- chine, the upper limbs are subjected to vibrations lower than 2.5 m/sq.sec., while the seated part of the body is subjected to vibrations lower than 0.5 m/sq.sec. 5.1.4 LOAD DISTRIBUTION ON THE AXLES NOTE The values indicated in the table below refer to the machine ready to start with operator on board, equipped with forks, filled with coolant, lubricants and fuel, without optional equipment.
248 WH609 WH609 turbo WH613 WH613 turbo WH713 WH714 WH714H WH716 Load on front axle kg 4050 5290 5230 5300 5230 5760 Load on rear axle kg 4610 4510 5320 5320 5950 5830 Weight of the machine kg 8660 9800 10550 10620 11180 11590