Komatsu — 2.8.22 PRECAUTIONS TO BE TAKEN WHEN USING SYNTHETIC BIODEGRADABLE OIL TYPE «HEES»

PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8.21 PRECAUTIONS TO BE TAKEN WHEN INFLATING TYRES Always bear in mind that tyres can burst while being inflated, causing serious accidents. Before inflating tyres, always check the wheel rims and the tyre walls and tread for dents, cuts, broken plies, or other defects. Have tyres checked and serviced by specialized personnel. When inflating tyres, use a compressed air gun with extension hose and pressure gauge. Make sure that there is nobody in the vicinity before starting to inflate a tyre. Stand at the tread side of the tyre to inflate it. RKA01010 Never exceed the inflation pressures specified for each type of tyre.

Always check that the tyre pressures are identical on both sides of the machine. 2.8.22 PRECAUTIONS TO BE TAKEN WHEN USING SYNTHETIC BIODE- GRADABLE OIL TYPE «HEES» It is not possible to mix the synthetic biodegradable oil type HEES with ordinary hydraulic oils, since when the temperature increases insoluble compounds are generated, which are deposited on the filters and clog them (the maximum concentration of ordinary oil must not exceed 1% of the total quantity of oil). Biodegradable oil can be used only in the hydraulic system; it cannot be used for the endothermic engine, the transmissions, the braking system, etc.

Before introducing synthetic biodegradable oil in the hydraulic system, empty the system completely, discon- necting the cylinders and all the parts that may contain ordinary oil, and replace the drain filter with a new one. Start the engine and let it idle without using the work equipment, wait until the oil reaches a temperature of at least 40°C, then start moving the equipment, so that all the parts of the system are filled with oil. Stop the engine and check the oil level (see «4.7.8.c CHECKING THE HYDRAULIC OIL LEVEL»). 63