INSTRUMENTS AND CONTROLS the machine as soon as possible and provide for refuelling. When working on slopes, refuel as soon as the indicator starts flashing; the engine may stop suddenly, making it difficult to control the machine and leading to serious risks. 4 - SLI-SAFE LOAD INDICATOR This instrument provides visual and acoustic signals regarding the longitudinal stability of the machine during the load lifting phase. When the stability limit is going to be reached, an acoustic alarm is emitted. For further details on the use and functions of this device, see «3.2.5 MACHINE CONTROLS» pos. 7 - SLI-SAFE LOAD INDI- CATOR.
4 RKAA1060 5 - WATER LEVEL (SPIRIT LEVEL) This instrument makes it possible to check the levelling of the ma- chine during the frame stabilization phase and during work. For a correct levelling operation, the water level must be centered transversally in the central circle that represents the optimal centering zone. The circles outside the central one represent the inclination levels divided 2° by 2° up to a maximum of ±5є. The maximum longitudinal inclination during work is 2°, corre- sponding to the tangential position of the water level with respect to the second circle.
3 ° 5 0 5 ° 0 1 ° 0 0 5 ° 3 ° 1 ° 6 - HOUR METER RKAA2310 This instrument is positioned on the left side of the dashboard and indicates the operating hours. The reading must be considered valid for the calculation of the time intervals indicated for routine maintenance operations. 6 RKAA1070 69 3 - FUEL LEVEL INDICATOR • Indicates the fuel level in the tank and is divided into two-colour led bars: a - flashing red = low fuel (first bar). b - green = all the other bars. NOTE • Rated capacity of the tank: 130 l. IMPORTANT • If the indicator reaches the low fuel area during work, stop