INSTRUMENTS AND CONTROLS 11 - PARKING LIGHTS AND LOW BEAM WARNING LIGHT (Green) This warning light comes on when the parking lights and the low beam are operated with the corresponding switch «3.2.3 SWITCHES AND PUSH BUTTONS» pos. 1 - PARKING LIGHTS AND LOW BEAM SWITCH). RKA00970 12 - DIRECTION INDICATORS WARNING LIGHT (Green) This warning light comes on intermittently when the direction indi- cator lever is operated (see «3.2.3 SWITCHES AND PUSH BUT- TONS» pos. 11 - EMERGENCY INDICATORS SWITCH). RKA00980 13 - HIGH BEAM WARNING LIGHT (Blue) This warning light comes on when the high beam is turned on with the dimmer switch (see «3.2.3 SWITCHES AND PUSH BUT- TONS» pos.
21 - DIRECTION INDICATORS - DIMMER SWITCH - HORN - FRONT WINDSHIELD WIPER/WASHER). RKA00990 fore of the ground. That’s why the 30° value may not correspond to the value displayed by the inclinometer. The locking of the axle inhibits the frame levelling function. 73 14 - REAR AXLE SWING LOCK WARNING LIGHT (optional) This warning light comes on when the rear axle is locked, that is, when the inclination of the telescopic boom exceeds approxi- mately 30°or when WORK mode is selected. WORK (see «3.2.5 MACHINE CONTROLS» pos. 3 - OPERATING MODE SELEC- TION UNIT.
NOTE • The 30° inclination of the telescopic boom indicates the value obtained by adding the inclination angle of the tele- scopic boom to the inclination of the machine and there- RKA01000