Komatsu — 3.2.3 SWITCHES AND PUSH BUTTONS

INSTRUMENTS AND CONTROLS 15 - MACHINE OPERATING MODE SELECTOR This is a three-position selector that must be operated exclusively with the machine at rest. With this selector it is possible to choose among three operating modes: TRAVEL, TRAVEL-WORK and WORK. For details on how to select and use the three operating modes, see «3.2.5 MACHINE CONTROLS». RKAA0600 15 16 - STEERING MODE SELECTION PUSH BUT- TONS 16 These are four buttons and must always be pressed in pairs; they make it possible to choose between two or four-wheel steering.

In particular, they make it possible to steer with the front wheels only (compulsory for circulation on roads) or with four wheels for either round or crab steering. For more details on the steering mode selection procedure, see «3.2.5 MACHINE CONTROLS». RKAA2290 17 - BOOM EXTENSION AND RETRACTION POTENTIOMETER This is a proportional potentiometer rotating in two directions that returns to the center whenever released. Turn it forward to extend the boom and turn it backward to retract the boom. For further details on how to use this potentiometer, see «3.2.5 MACHINE CONTROLS».

17 RKAA0620 18 - 19 PUSH BUTTONS FOR HYDRAULICALLY- CONTROLLED EQUIPMENT These buttons are used only when the quick coupling or hydrauli- cally-controlled equipment are installed. 18 (AUX1) 19 (AUX2) RKAA0623 79