INSTRUMENTS AND CONTROLS 3.2.4 ELECTRIC ACCESSORIES 1 - ACOUSTIC ALARM The acoustic alarm starts when the circuits are energized with the ignition key (rotation to position « I ») and stops automatically after the automatic check on the warning lights. The continuous sound during the use of the machine signals: insufficient engine oil pressure; overheating of the engine cooling circuit; aulty alternator or worn belt. The intermittent sound during the use of the machine signals: RKA01070 misalignment of the rear wheels; interval between selection and actual operation of the selected steering mode.
2 - ROOF LIGHT This lamp is used to check the instruments and the inside of the cab and to consult the load charts when visibility is poor. The roof light can be switched on by pressing one of its short sides. 2 RKAA0660 3 - POWER OUTLET A power outlet is positioned on the rear part of the machine for the connection of a lighting device for routine and maintenance oper- ations. It is a two-pole outlet and is in compliance with the ISO 4165- 1979 standard. Power supply 12 V. 3 RKAA0670 82