PRODUCT IDENTIFICATION 1.4 PRODUCT IDENTIFICATION The Komatsu Utility TELESCOPIC HANDLERS and their main components are identified by serial numbers stamped on the identification plates. The serial number and the identification numbers of the components are the only numbers that must be indicated to the Dealer when requiring assistance and ordering spare parts. 1.4.1 MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN) The machine bears the data required by the EC Directives, as well as the Product Identification Number (PIN) (1). The PIN is: 1 a - stamped on the front right part of the machine.
RKAA0880 7 b - indicated on the identification plate as alphanumeric stamping and as a bar code. The identification plate (2) is fixed to the front right part of the frame, in a protected place, in such a way as to prevent it from getting damaged and becoming illegible. 1 NOTE • If the serial number on the plate has been damaged, it can be obtained by separating the last 6 digits of the PIN. 2 RKA01690