Komatsu — 3.2.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS The operating functions of this unit are the following: 2-1 START When the machine is started, the two-wheel steering is al- ways selected and therefore the led (6) is on. If the rear wheels are misaligned: 6 a - the intermittent acoustic alarm starts; b - the transmission is locked and therefore travel is inhibited; c - the last steering mode previously selected is automatical- ly engaged. RKAA0619 In these conditions, the rear wheels are realigned (leds 8 and 9 on) by turning the steering wheel, the two-wheel steering is automatically selected, the acoustic alarm stops and the transmission lock is released.

6 8 9 RKAA0611 5 8 9 RKAA0618 2-2 REAR WHEEL ALIGNMENT When the two-wheel steering is selected, the misalignment of the rear wheels can take place with speed un- der or over 13 km/h; in both cases the acoustic alarm starts sounding, intermittently if the speed is under 13 km/h, continuously if the speed exceeds 13 km/h. The realignment procedure with speed under 13 km/h is the following: a - turn the steering wheel until the front wheels are aligned (led 8 on); b - select the round steering with push buttons (1) and (2); c - realign the rear wheels by turning the steering wheel until the leds (8) and (9) are on.

1 2 NOTA The alignment involves the automatic selection of the two-wheel steering. When the speed exceeds 13 km/h, the starting of the contin- uous acoustic alarm requires the operator to reduce the speed under 13 km/h; once this speed has been reached, the procedure described above can be carried out. 8 9 RKAA0612 89