ELECTRICS 2.21 DISPLAY MODULE The display module (1) is mounted in the cab side console on the right side of the cab. The display module provides audible and visual signals in order to alert the operator to the forward stability of the machine. A harness with two connectors is attached to the display module. The 4-way connector (5) is used to connect the display module via an intermediate wiring harness (3), that is routed through the cab, to the harness on the sensor (2) fitted to the rear axle. The second connector (4), a 2-way version, is used to connect to the main electrical system of the machine to provide power to the LSI.
The display module measures the load from the sensor by changes in voltage. This is then calculated as a percentage value of the maximum load. Indicators are then illuminated on the panel of the display module according to the percentage value. The display module has eleven indicators.